Solution properties,unperturbed dimensions,and chain flexibility of poly(1‐adamantyl acrylate)

Poly(1‐adamantyl acrylate) (PAdA) exhibits much higher glass transition and degradation temperatures than other polyacrylates. However, the quantitative evaluation of the stiffness of this polymer chain has not been reported previously. In this study, the dilute solution properties and conformational characteristics of PAdA were evaluated using viscometry and scattering techniques. The unperturbed dimensions of this polymer were evaluated using the Burchard–Stockmayer–Fixman extrapolation and the touched‐bead wormlike chain model. The PAdA chain has a comparable persistence length, diameter per bead and characteristic ratio to poly(methyl methacrylate) and polystyrene. All these results indicate that PAdA is less flexible than common polyacrylates. In addition, the second virial coefficients (A₂) of PAdA in different solvents obtained by static light scattering were compared. Among the solvents investigated, tetrahydrofuran is a moderate solvent. Radius of gyration of a polymer sample in the various solvents ranged from 16.8 to 30.3 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1526–1531     

Magnetic properties of neutron irradiated RPV steel

The neutron irradiated reactor pressure vessel (RPV) steels at various dose of 0–10¹⁸ n/cm² have been studied with Mössbauer, x-ray diffraction, and VSM. The Mössbauer data shows that the value of magnetic hyperfine field of Fe atom that exist at martensite is 330 kOe at site 1 and 305 kOe at site 2. At room temperature, the total absorption area of Mössbauer spectra with respect to irradiation of neutron is constant for the dose of 0–10¹⁶ n/cm², while over the dose of 0–10¹⁷ n/cm² the absorption area decreases rapidly. But the doublet area for the dose of 0–10¹⁶ n/cm² is constant, while over the dose of 10¹⁷ n/cm² it increases with increasing the fluence level of neutron. The coercivity and remanence of the neutron irradiated samples do not change significantly. But the maximum induction decreases by 5% at 10¹⁸ n/cm², compared with that of the as-received sample.     

电喷雾质谱在金属配合物研究中的应用

综述了电喷雾质谱(ESI-MS)在金属配合物分析中的应用,详细介绍了电喷雾质谱在测定金属配合物的分子量、表征金属配合物的结构、分析金属离子与配体的相互作用及相关机理等方面的研究进展.     

化学基元组学与药物创新

化学基元组学（chemomics）是与化学信息学、生物信息学、合成化学等学科相关的交叉学科．生物系统从内源性小分子（天然砌块）出发,通过酶催化的化学反应序列制造天然产物．生物系统通过化学反应和天然砌块向目标天然产物“砌入”一组原子,这样的一组原子称为化学基元（chemoyl）．化学基元组（chemome）是生物组织中所含有的化学基元的全体．化学基元组学研究各种化学基元的结构、组装与演化的基本规律．在生存压力和繁衍需求的驱动下,生物系统已经进化出有效手段来合成天然产物以应付环境的变化,并产生了丰富多彩的生物和化学多样性．近年来,人们意识到药物创新的瓶颈之一是药物筛选资源的日益枯竭．化学基元组学可以解决这个瓶颈问题,它通过揭示生物系统制备化学多样性的规律,发展仿生合成方法制备类天然化合物库（quasi natural product libraries）以供药物筛选．本文综述了化学基元组学的主要研究内容及其在药物创新各领域中的潜在应用．     

The Reaction of Ninhydrin with Trimethylbenzenes under Friedel-Crafts Reaction Conditions

The reaction of ninhydrin with 1,2,3- and 1,2,4-trimethylbenzene in the presence of H₂SO₄ or AlCl₃ afforded 2-monoaryl and 2,2-diaryl-1,3-indanedione derivatives as the major products. With 1,3,5-trimethylbenzene as the arene nucleophile, either a reduction product or an indenoindanone derivative was obtained depending upon the catalyst employed in the reaction.     

Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Designed Synthesis of Well‐Defined Pd@Pt Core–Shell Nanoparticles with Controlled Shell Thickness as Efficient Oxygen Reduction Electrocatalysts

Improving the electrocatalytic activity and durability of Pt‐based catalysts with low Pt content toward the oxygen reduction reaction (ORR) is one of the main challenges in advancing the performance of polymer electrolyte membrane fuel cells (PEMFCs). Herein, a designed synthesis of well‐defined Pd@Pt core–shell nanoparticles (NPs) with a controlled Pt shell thickness of 0.4–1.2 nm by a facile wet chemical method and their electrocatalytic performances for ORR as a function of shell thickness are reported. Pd@Pt NPs with predetermined structural parameters were prepared by in situ heteroepitaxial growth of Pt on as‐synthesized 6 nm Pd NPs without any sacrificial layers and intermediate workup processes, and thus the synthetic procedure for the production of Pd@Pt NPs with well‐defined sizes and shell thicknesses is greatly simplified. The Pt shell thickness could be precisely controlled by adjusting the molar ratio of Pt to Pd. The ORR performance of the Pd@Pt NPs strongly depended on the thickness of their Pt shells. The Pd@Pt NPs with 0.94 nm Pt shells exhibited enhanced specific activity and higher durability compared to other Pd@Pt NPs and commercial Pt/C catalysts. Testing Pd@Pt NPs with 0.94 nm Pt shells in a membrane electrode assembly revealed a single‐cell performance comparable with that of the Pt/C catalyst despite their lower Pt content, that is the present NP catalysts can facilitate low‐cost and high‐efficient applications of PEMFCs.